Mixtures of "KALMATRON" TM belong to the group of active
protection of reinforced concrete structures: as a result of chemical
interaction with the protected surface, they improve the structure of concrete
and impart waterproofing properties. https://www.kalmatron.az/divarlarin-hidroizolyasiyasi beton qatqıları They are similar to each other, but -
depending on the composition of chemically active reagents - are used at different
stages of construction.
KALMATRON sells effective formulations that can form durable chemical bonds
during contact on the basis of processed for waterproofing of reinforced
concrete structures. The choice of a particular material is influenced by both
its technical properties and the method of application.
COLMATEX coating is applied to the concrete surface with a spatula, large
brush or sprayer to a thickness of 1.5–2 mm. In this case, it is recommended to
use hidroizolyasiya https://www.kalmatron.az/news/hidroizolyasiya hidroizolyasiya materialları "KALMATRON-SHOVNIY"
non-settling cement mixture to fill gaps, large cracks or crevices. It provides
quality results in the sealing of joints, concrete crossings and seams in order
to prepare for the next stages of waterproofing. However, it is not recommended
to use this composition in the repair of deformation seams, as well as weakly
weakened foundations.
KOLMATEX dry mixes are widely used for waterproofing of reinforced concrete
structures of any purpose. As the mixture https://www.kalmatron.az/news/toppinq toppinqlər və qruntovkalar does not contain any toxic substances, it can be used
in contact with drinking water. COLMATEX reliably protects the surface from any
aggressive environment. After processing with this composition, the structures
become more frost-resistant and strong, while maintaining air permeability.
"KALMATRON-Ekonom" is a plaster coating for concrete and brick
surfaces. Using "KALMATRON-Economy" coatings increase the strength,
frost resistance and waterproofing of devices. The composition has high
adhesion and can be used with many building materials. Apply the prepared
mixture on a wet surface with a spatula or a large brush in a single layer. The
thickness of the layer can be 30 mm on the reinforcing mesh, 8-15 mm on the
non-reinforcing surface. All joints and seams are expanded and filled.
Комментарии
Отправить комментарий