KALMATRON

 

KALMATRON coating is applied to the https://www.kalmatron.az/divarlarin-hidroizolyasiyasi  beton qatqıları concrete surface with a spatula, large brush or sprayer to a thickness of 1.5–2 mm. In this case, it is recommended to use "KALMATRON-SHOVNIY" non-settling cement mixture to fill gaps, large cracks or crevices. It provides quality results in the sealing of joints, concrete crossings and seams in order to prepare for the next stages of waterproofing. However, it is not recommended to use this composition in the repair of deformation seams, as well as weakly weakened foundations.

KALMATRON sells effective formulations that can form durable chemical bonds during contact on the basis of processed for waterproofing of reinforced https://www.kalmatron.az/news/toppinq toppinqlər və qruntovkalar concrete structures. The choice of a particular material is influenced by both its technical properties and the method of application.

"KALMATRON-Ekonom" is a plaster coating for concrete and brick surfaces. Using "KALMATRON-Economy" coatings increase the strength, frost resistance and waterproofing of devices. The composition has high adhesion and can be used with many building materials. Apply the prepared mixture on a wet surface with a spatula or a large brush in a single layer. The thickness of the layer can be 30 mm on the reinforcing mesh, 8-15 mm on the non-reinforcing surface. All joints and seams are expanded and filled.

Mixtures of "KALMATRON" TM belong to the group of active protection of reinforced concrete structures: as a result of chemical interaction with the hidroizolyasiya https://www.kalmatron.az/news/hidroizolyasiya  hidroizolyasiya materialları protected surface, they improve the structure of concrete and impart waterproofing properties. They are similar to each other, but - depending on the composition of chemically active reagents - are used at different stages of construction.